FAQ
Frequently Asked Questions
How much does it cost to get pavers sealed in Spring Hill?
One Spring Hill company posts $1 to $3 per square foot, and another lists $1.25 to $1.50 for sealing by itself. At $1 to $3, a 1,000 square foot driveway runs about $1,000 to $3,000. Stripping failed sealer costs more. For a price on your own pavers, ask for a free estimate.
How often should pavers be resealed in Florida?
Plan on two to five years. A Spring Hill company says every two to three years, and Unilock, a paver maker, says many owners reseal every three to five. Pool decks and busy areas can need it sooner. To have yours checked, call (352) 820-2319.
What are the downsides of sealing pavers?
The main one is repeat cost, since sealer has to be redone every few years. Unilock says a high gloss finish can be slippery when wet and a matte finish is safer. Sealer over an incompatible old coat can also turn whitish. To talk through the trade-offs, call (352) 820-2319.
Should pavers be sealed in Florida?
Often yes. A Spring Hill company says UV rays fade color while humidity and rain bring mold, algae and efflorescence, and sealing guards against them. Unilock adds that its own pavers do not require sealing, so the choice is about color and upkeep. To see if yours are ready, ask for a free estimate.
Should pool deck pavers be sealed?
Often yes, with the right finish. Unilock says a pool deck that sees splash and sunscreen gains resistance to moisture and mildew, and that a matte finish keeps traction. A Spring Hill company says pool decks can cost a little more for prep and a non-slip finish. To have a pool deck looked at, ask for a free estimate.
Who handles paver sealing in Spring Hill, FL?
A local contractor who serves Spring Hill and the other places on this site does the work, and you hear back within 1 business day, usually much sooner. The estimate is free, and saying no is free too. To reach one, call (352) 820-2319.
Does Spring Hill humidity change when pavers get sealed?
It can move the date. Unilock says pavers must be dry first, a few hours in warm sun but about 24 hours in cool shade, with clear skies for 24 to 48 hours. Rain and damp shade both push a job back. To find a date the weather allows, call (352) 820-2319.
What do professionals use to seal pavers?
A low pressure sprayer and a roller, with a water based or solvent based sealer. Unilock, a paver maker, describes spraying the coat on and using a dry roller to soak up the excess so streaks and drip marks do not form. A Spring Hill company says the sealer can be a wet look or natural finish.
Contact Us Today for a Free Estimate
A contractor who serves your area can answer any other question.
Free, no obligation
